[basshawk]

I replaced my yoke on my 12 bolt truck rear end. I decided to change the crush sleeve to a solid spacer at this time. I did not check the wear pattern on the gears before I took it apart. I did not change any shims and thought that the rear end would function the same if I put everything back where it came from. Now I have it back together and it seems as if the pattern is towards the toe of the gear with it completely coming off the gear on the coast side. This is the first rear end I have taken apart and was wondering if someone with more experience would look at the pictures and give me their opinion. Any help would be greatly appreciated.