|
400" 4-Bolt with .030" over Forged TRW's
I have a 400" 4-bolt main shortblock with the following done to it:
*.030" over TRW forged pistons (new - part # L2352F 30)[.083" dish - 9.9:1 compression with 64cc heads]
*400" crank turned .010"/.010"
*400" rods resized
*Pistons installed on rods
*Crower hyd. cam (new - Part # 00670, grind # B268h) [Dur: 268* Lift: .450" w/1.5 ratio]
*New cam, main, rod bearings & rings
*Cam bearings installed
**Price $1000 plus shipping**
Price reduced to $800 - $750 without cam
__________________
Scott
Last edited by GSXMEN; 10-25-2004 at 03:59 PM.
Reason: Price Change
|