The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PAWS 72 · 08-22-2012, 10:09 PM

Itook the inner fender out then the lower bolt on the back of the fender under the doors.When you do that you can barely get to the back nut on the emblem.

I used a racheting box end wrench to get it off.If you got a skinny hand you can feel to get it back on.It's touch but doable.

BE VERY CAREFUL IF you have to ease the fender out to get your hand to the back side.That's how I did mine.There may be a easier way but I don
t know.

08-22-2012, 10:09 PM	#3
PAWS 72 Registered User Join Date: Nov 2011 Location: Sheffield, ALA Posts: 2,472	Re: Custom Emblem Removal? Itook the inner fender out then the lower bolt on the back of the fender under the doors.When you do that you can barely get to the back nut on the emblem. I used a racheting box end wrench to get it off.If you got a skinny hand you can feel to get it back on.It's touch but doable. BE VERY CAREFUL IF you have to ease the fender out to get your hand to the back side.That's how I did mine.There may be a easier way but I don t know.