The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 200-4R behind a 250 c.i. I6

GuyO · 09-12-2012, 03:37 PM

Another thought is to take the cable bracket off of small blocks that bolts onto the coil holder mount on the intake maniford and bend so that it is perpendicular or 90 degrees to the I6. The offset lines up pretty well with the mono-jet throttle linkage. The modified bracket can be mounted on the I6 intake with a 3" muffler clamp!

09-12-2012, 03:37 PM	#16
GuyO Registered User Join Date: Nov 2011 Location: Kirkland, WA Posts: 343	Re: 200-4R behind a 250 c.i. I6 Another thought is to take the cable bracket off of small blocks that bolts onto the coil holder mount on the intake maniford and bend so that it is perpendicular or 90 degrees to the I6. The offset lines up pretty well with the mono-jet throttle linkage. The modified bracket can be mounted on the I6 intake with a 3" muffler clamp!