|
Re: How to order brake line kit with system like this??
Quote:
Originally Posted by SS Tim
It "LOOKS" like they just pulled the existing drum distribution valve out and used a union to join the lines. This eliminated your brake warning lamp switch. The line going into that added rear adjustable prop. valve appears to be the original line all twisted and rusty. Inline Tubes would be the place to start. Adding a 71-72 combination valve should take care of your warning light and the prop. valve need with a stock 71-72 type installation. They make these new along with the lines and brackets. A SS line kit should be no problem for them. www.inlinetube.com |
So I could order a disc/drum combo value that goes under the master cylinder and just put in a union or new line where the other one is by the rear tire? Then maybe the factory lines would work for it?
thanks again for all your time
Weev-
__________________
Weev-
Life's tough...... It's even tougher when your stupid - John Wayne
|