The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 6-8 Questions

86C10LWB · 11-15-2012, 12:41 AM

So I finally got the free V8 in and running.

All that needed to change was the towers on the cross member. Moved them up one hole. No drilling or cutting.

Pretty easy swap.

The motor I set in is a 69-72 307ci I think it has a small cam, dont know. Didn't tear it down. The heads, if there stock, are 1.72 intake 1.50 exhaust IIRC.

Straight pipped with some flowmasters, there coming off and a set of magnaflows are taking their place. Don't care for the flows drone.

Ill try and get some photos up tomorrow.

11-15-2012, 12:41 AM	#19
86C10LWB Registered User Join Date: Jun 2012 Location: texas Posts: 26	Its officially and V8 So I finally got the free V8 in and running. All that needed to change was the towers on the cross member. Moved them up one hole. No drilling or cutting. Pretty easy swap. The motor I set in is a 69-72 307ci I think it has a small cam, dont know. Didn't tear it down. The heads, if there stock, are 1.72 intake 1.50 exhaust IIRC. Straight pipped with some flowmasters, there coming off and a set of magnaflows are taking their place. Don't care for the flows drone. Ill try and get some photos up tomorrow.