|
Re: Question of the day? 307sb, timing chain and valves
Is it a stock motor or has the block been decked or heads milled or anything like that? If it is a stock type motor pretty good chance you didn't hurt the valves. If it a higher compression and parts have been modified for less clearance there is a possibility that you hurt them . I would at the very least do a leakdown test on the cylinders. But would be better off pulling the heads and actually looking at the valves and checking them out. Hth Dan.
Posted via Mobile Device
__________________
68 Chevy c10 longbed 307 with 305 H.O. heads,edelbrock performer intake,edelbrock performer plus cam,hei,Holley 650 double pumper and th400. Daily driver. It hauls butt,it hauls my butt where I need to go 
|