I'm working on removing the incorrect broken np203 from my rig and putting a correct/working np205 in that came from a 73/74 model. my trans is a th350
I picked up a 205 and luckily it has an adapter. Sadly, after I found a shifter and bolt, I found out the holes were stripped.
I first thought about doing a heli-coil fix. The kit is fairly expensive, plus I dont have a drill to handle the bit I would need.
Looked at a new one from summit. All I have to say is
Slightly hunted for some used adapters. I am finding a wide variation on these and not sure whats what, so I'm wanting some help here on making sure I get the right one.
I'm wanting to know what year(s) these options where around.
I know there were two bolt sizes used. 1/2 or 9/16.
There is a figure 8 pattern, and round pattern.
Any other things I need to be aware of?