The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

eray92 · 04-26-2013, 01:38 AM

Hello guys, I have an 86 Chevy K10 with a 350/400/208 right now. I bought a rolling frame for the stock leafs and 12 bolt rear end and decided to use the 10 bolt for the front so I would have the same gears. the frame had a firewall still one it and everything still bolted to it. It had a SM465/205 with everything need to swap over. Z-bar, z-bar bracket, pedals, crossmember clutch/pressure plate/flywheel and drive shafts.

Well now I have to decided to go with a 700r4. My trouble is I do not have the funds for it and wish to trade my swap for a 700 and transfer case but everyone around me is either into imports or not into cars. Anyone near southeast Indiana?

04-26-2013, 01:38 AM	#1
eray92 Registered User Join Date: Dec 2012 Location: Batesville Indiana Posts: 126	thinking about 700r4 swap Hello guys, I have an 86 Chevy K10 with a 350/400/208 right now. I bought a rolling frame for the stock leafs and 12 bolt rear end and decided to use the 10 bolt for the front so I would have the same gears. the frame had a firewall still one it and everything still bolted to it. It had a SM465/205 with everything need to swap over. Z-bar, z-bar bracket, pedals, crossmember clutch/pressure plate/flywheel and drive shafts. Well now I have to decided to go with a 700r4. My trouble is I do not have the funds for it and wish to trade my swap for a 700 and transfer case but everyone around me is either into imports or not into cars. Anyone near southeast Indiana?