Quote:
Automatic Transmission
1. Place the shift tube lever in "Neutral" or "Drive".
2. Loosen adjusting ring clamp screws and rotate the
shift tube adjusting ring to obtain .33" to .36" cle a rance
between the shift tube lever and adjusting ring
(fig. 7).
3. Tighten the adjusting ring clamp screws to 70 in. lbs.
|
Quote:
MANUAL LINKAGE
Manual linkage adjustment and the associated neutral
safety switch are important from a safety standpoint.
The neutral safety switch should be adjusted so that the
engine will s ta rt in the Park and Neutral positions only.
With the selector lever in the Park position, the parking
pawl should freely engage and prevent the vehicle
from rolling. The pointer on the indicator quadrant should line up properly with the range indicators in all
ranges.
|
ill give it a shot tomorrow. NSS I have covered. been there..