The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wrenchbender Ret · 06-30-2013, 10:15 PM

Measure from the ledge at the end of the seal to the flange of the a-arm. on each side. Get it as close to center as possible.

06-30-2013, 10:15 PM	#4
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Lower cross shaft adjustment?? Measure from the ledge at the end of the seal to the flange of the a-arm. on each side. Get it as close to center as possible.