The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wrenchbender Ret · 08-24-2013, 03:02 PM

The rear end & engine need to be on the same plane, parallel to each other. 5 degrees max angle for the drive shaft with 1 degree minimum.

08-24-2013, 03:02 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Correct factory pinion angle The rear end & engine need to be on the same plane, parallel to each other. 5 degrees max angle for the drive shaft with 1 degree minimum.