The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mrein3 · 12-11-2003, 01:27 AM

Go buy a welder. NOW!

I just got in from plowing the driveway. I'm in a new (to me) house with a big driveway. This fall I purchased a used ATV with a snow plow to clear the snow. Tonight was the first time I really needed to use it. About 1/2 way through the job the rod that raises and lowers the plow broke.

30 minutes and about 2.5 inches of threaded rod later I was back in action.

AND you can stick new rockers and cab corners on that rusty cab you just bought.

12-11-2003, 01:27 AM	#15
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	Go buy a welder. NOW! I just got in from plowing the driveway. I'm in a new (to me) house with a big driveway. This fall I purchased a used ATV with a snow plow to clear the snow. Tonight was the first time I really needed to use it. About 1/2 way through the job the rod that raises and lowers the plow broke. 30 minutes and about 2.5 inches of threaded rod later I was back in action. AND you can stick new rockers and cab corners on that rusty cab you just bought. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN