|
Re: question on intsalling cpp drop cross member
Also, nice build ya got going there! I just read your thread, I also noticed that your running the same cpp shocks as I bought could you please verify them to fitting the stock lower control arms as mine didn't so I had CPP Jeff send me replacement bushings so I could machine/face them off in the lathe so they would fit!...If you click on my signiture or link thing you can see my crossmember it's all stock! except the Mcgaughys dropped spindles and the cpp 1'' drop spings...I believe the bushings were about .120-.180 to long to fit in the lower control arm!
Peace,
Kev...
__________________
Kev's-C-10 
|