[Wrecked1982]

Franken, actualy its also the doubler setup im going with. i need to find an np203 case that was bolted to a th400 to have the 32 splines shaft and redrill and tap it to fit the tailhousing. for the tc the pre 85 np 205 figure 8 bolt has the short 32 spline shaft or if i use post 85 6 bolts round patern the input shaft is longer ,but both have aftermarket adapters to make it fit on the 203 low range box. and to finish ill have to find a ford np205 to swap the output shaft to a fixed yoke and also swap the front output shaft to a 32 splines bigger shaft than the gm ones and of course 2 new drive shaft. this is pretty much what a lot of reserch tought me about the whole thing.but i might have missed something tough so others can correct me. i was more concern about witch truck i should look for to get the nv4500