|
Re: Cross country…or Bust? Long trip for C10..
Back in the early 90's, I bought a 68 chevelle project. I had it tore apart about as far as you could, without removing it from the frame. I replaced the full floor pan, and decided to put it together and drive it. With a used engine and trans, that was supposedly rebuilt, my wife and I took off for Reno from Watertown S.D., with about 300 in town test miles on it. We put about 4500 miles on round trip. Had to replace a plugged fuel filter, (after several roadside stops to blow out the rusty flakes), and used about a case of oil. Found out later that the rebuilt engine, had the rear main installed backwards. It was a great trip that we will never forget!
I would make sure it has good belts, hoses, and tires. Take along some tools, spare fluids and duct tape.
I would also recommend taking the time to see all the little roadside curiosities along the way. I have pics of my chevelle at the Bonneville salt flats.
I say make the trip. With 4.10's, mileage will suck, but the memories will be priceless!
|