Quote:
Originally Posted by Husker
Lattimer which intake and cam did you use?
Thanks
Ron
|
They both came with the motor. Intake is an aluminum Edelbrock performer knock off.
Cam specs
Hydraulic Flat Tappet
Duration @ .050'' Lift: 224 Intake / 230 Exhaust
Lift: .480'' Intake / .486'' Exhaust
Lobe Separation: 110°
Its got a decent lope but still makes 14" vacuum at idle. Supposedly ok for 1800-2200 RPM stall converter, but I run a manual so didn't worry about that.