|
Re: 68 disk/power brake conversion questions.
If you do not want to lower your truck you can use the spindles off the 85 and put new ball joints upper and lower , outer tie rods. you still have to come up with a booster and master. plus you will have to plumb all new brake lines which will include a proportioning valve.
I have had a couple friends do it this way and just buy 6 lug rotors. My one friend said next one he will just buy the kit because he ended up putting new hoses , calipers and booster and master. The only use his donor part were good for was cores because he lowered the truck with drop spindles
|