Quote:
Originally Posted by hamjet
the bolt pattern won't allow it to be put in upside down....
|
I agree with Joe, the fan shroud does not have mounting holes on both sides. The bottom of the shroud is designed to fit into clips on the radiator support.
I also agree to double check your engine mount perches and trans mount/trans cross member. If any of it is incorrect, it will cause your problem. How is the angle of the drive train? Looking at your photo, I would try shimming the trans mount to change the angle. This would pull the bottom of the fan away from the shroud and push the top of the fan a little more into the shroud. Simple to try and see what happens.
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at
tbonegarris@yahoo.com
I am also a dealer for Counterpart for gauge cluster parts only.
Also see my facebook page, CG&C