The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DubyaS6 · 09-12-2014, 10:48 AM

After we mocked up the front, it was time to start on the rear of the truck. We pulled the bed off and pulled out the stock rearend and trailing arms:

It was now time to start cutting out the frame for the C notch:

Roadster Shop C notch mocked up:

We thought we may need to modify the tunnel area to fit the big 4L80e, but these pictures show plenty of clearance:

C notches installed, time to install the rearend housing and 4 link:

09-12-2014, 10:48 AM	#16
DubyaS6 Registered User Join Date: Jul 2014 Location: Copper Canyon, TX Posts: 32	Re: New here...my '70 C10 build After we mocked up the front, it was time to start on the rear of the truck. We pulled the bed off and pulled out the stock rearend and trailing arms: It was now time to start cutting out the frame for the C notch: Roadster Shop C notch mocked up: We thought we may need to modify the tunnel area to fit the big 4L80e, but these pictures show plenty of clearance: C notches installed, time to install the rearend housing and 4 link: