Quote:
Originally Posted by Lee H
If all your missing is that one bolt just skip it. One other thing to keep in mind is that the bracket width between the years is different so you could end up with a misalignment of the pulleys.
|
Since I had both backets off I put them up side by side and compared everything. Both were identical, but I could have missed the upper bolt position.
As far as skipping it, I'd rather not. I don't have anywhere on the intake to put these support brackets on the back of the ac bracket. The longer one goes bolted back towards the carb and the shorter one runs over to the drive side. Already decided to skip those.