Quote:
Originally Posted by Steve Cole
Hi '68 Orange,
My plan was to paint the letters. I was going to spray the letter area white then carefully place the decals over the painted letters, spray the tailgate blue then remove the decals. The letters were to be used as masking.
Anyone with a stepside, look at your "E" and see if the fingers are rounded or squared.
See pics below. The p/n I ordered said "67-72"
Attachment 1308422
Attachment 1308423 |
Sounds like a good plan, but
3M blue 1'' masking tape might be cheaper, and not involve trans-Pacific container ships. Tape would be easier to scrape off of the undercolor, too.
Blue masking is the low tack tape. Tracing out your cut line with an Exacto knife gives a sharper line than a decal.