View Single Post
Old 01-26-2015, 01:09 AM   #3
FirstOwner69
Senior Member
 
FirstOwner69's Avatar
 
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,854
Re: Alternator mounting

I'm not sure you'll get much info here since those brackets are clearly not what was originally used on these trucks. All SBC engine trucks from 67-72, with or without A/C, came with the alternator on the driver's side. Below is a picture of the front of my GM 350 crate engine with Vortec heads. If you go with factory A/C brackets with your Vortec heads, you will find that the 2 upper braces (not present in my pic) won't work due to the different intake bolt angle and placement. I had to fabricate my own braces. It won't solve your problem, but I hope the pic helps.
Attached Images
 

Last edited by FirstOwner69; 01-26-2015 at 01:19 AM.
FirstOwner69 is offline   Reply With Quote