Quote:
Originally Posted by kxmotox247
I found a complete Ford 31 spline 3:50 Traction Lock rear from a 79 f150 for $350. It cost $65 for new axle seats from CPP. $150 to narrow the housing and shorten/respline the axles and redrill the bolt pattern. I had the center section disassembled and cleaned with new bearings for $90. The clutches looked new.
It can be done much cheaper if you're willing to work with some used stuff. I probably could have re-used my driveshaft with a bastard u-joint but I had a new one made for around $200.
|
Wow thats a decent price ill have to call the wrecking yards around here .