|
Re: Need info with a rear end swap from 88-98
Quote:
Originally Posted by Sklptrljay
This is regarding a 1971 C/10 coil spring truck.
I've been trying to find a 3.73 complete rear end for a while and without dropping some big $. I haven't found a direct replacement for a 71/72 5 lug coil spring. I'm avoiding 6 lug's, as purchasing the 5 lug axles will cost a good chunk and I don't want a narrower stance.
So...I found a 3.73 from a 88-98 for a decent price. I know I have to weld on saddles for the coil springs. I already have a super track bar.
Bottom line will this work or won't it.
|
Yes, this will work. Make sure you match the pinion angle to the angle of the perches on the existing axle and your good to go. As you drop the vehicle, the existing (fixed) factory pinon angle follows the vehicle down. It rotates itself in other words...Dont over think it. Just match the perch locations and angles to the factory axle and your good to go... 
__________________
Michael of the clan Hill,
"Two Seventy Two's"
71 1-ton Dually 350 4-Speed
71 C/50 Grain Truck, 350 Split-Axle 4-Speed
02 3/4 ton Express
14 Indian Chief Vintage
1952 Ford 8N, "Only Ford Allowed On The Property"
"Be American, Buy American" 
|