Quote:
Originally Posted by 68c10airstream
Thanks for the wiring harness info. It looks like the CAN/bus start in the engine controller, daisy chained through every module and ends in the trans controller, and the dlc connection is "tee-ed" into the bus lines. Thanks again.
|
I was trying to make the diagram bigger, Started getting upset & turned the computer off
The above diagram is a '08 Express Van 6.0L/4L80E, The ECM & TCM have 120 ohm resistors built in, This particular set-up is "tee-ed" in, But not all are like this.
**Anybody using these diagrams for other models.....Be aware there are differences**
I cut the diagram in half, Maybe you can read it now.