Thread: temp gauge
View Single Post
Old 08-05-2015, 06:49 PM   #33
moon
Registered User
 
moon's Avatar
 
Join Date: Nov 2007
Location: Los Angeles, CA
Posts: 84
Re: temp gauge

Quote:
See my post with the diagram in it and read the top of the diagram I say that the pink wire is the fifth one down on the ignition switch. Follow this wire into the diagram and you'll see where the junction is of the three pink wires.
The cluster diagram I posted in post 11 has different colored lines indicating the paths of the cluster pin wires. You'll notice I said Purple LINE not purple wire. As you know these are all copper strips. Go over the posts I made carefully and you should be able to decipher information. As always ask any questions you need to clarify anything.
The wires in my fuse block connector aren't the same as what is pictured in the diagram. I've got 6 wires & the diagram shows 7 wires + the colors are not the same. I installed an H&M harness and now before I go any further I'm going to confirm I have the correct harness. After that I'll start a separate thread since my issue(s) are not the same as others posting here. THANKS again for your assistance!



__________________
1970 CST long bed Fleetside
moon is offline   Reply With Quote