The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Can ya post pictures of your factory stance, 2/2 drop, or 2/4 drop in SWB?

**71CHEVYSHORTBED402** · 08-23-2015, 12:39 AM

Doesn't anyone have a factory stance anymore? Mine is below, but it's a poor example, due to the paint situation, bad bushings, and some sag in the leaf springs.

I may run with a 3.5/5.5" if I can locate the parts. ECE can provide the rear. They have the 2.5" drop spindles of course, just need to see if everything works with a 1" coil.

Looking forward to researching tires and wheels someday. Of course that would mean it's done.

08-23-2015, 12:39 AM	#13
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: Can ya post pictures of your factory stance, 2/2 drop, or 2/4 drop in SWB? Doesn't anyone have a factory stance anymore? Mine is below, but it's a poor example, due to the paint situation, bad bushings, and some sag in the leaf springs. I may run with a 3.5/5.5" if I can locate the parts. ECE can provide the rear. They have the 2.5" drop spindles of course, just need to see if everything works with a 1" coil. Looking forward to researching tires and wheels someday. Of course that would mean it's done. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 08-24-2015 at 11:13 AM.