Quote:
Originally Posted by mongocanfly
Boat anchor..total rebuild or find another one ..my money would be on rebuild then ya know what ya got. Either way be sure to flush out your lines and trans cooler. And if big bird was still that big it wouldn't make any sense to call him little bird and if he was small it wouldnt make any sense to call him big bird...
|
Quote:
Originally Posted by Bigdav160
Is it missing first gear or second? That's a broken roller clutch, ,most likely second gear.
$100 in parts could have it all fixed up.
|
Quote:
Originally Posted by 67chevemall
That is one black pan! Mistake # 1 having auto transmissions in your life.
|
Quote:
Originally Posted by mongocanfly
Would be a good time to look into a overdrive auto trans also.
|
Thanks for all the feedback guys. Now I have some decisions to make:
My "eventual" plan for this truck was to put an overdrive transmission in it, so I'm just going to do that now instead of rebuilding or buying a new TH350. I want to cruise in this truck, move motorcycles, etc. I'm not building a race truck.
That said, I found this transmission at
Monster Transmissions, and with my limited knowledge of transmission inner workings, it seems like what I'm looking for and the three year warranty is reassuring.
Then I talked to the guy that I've been taking mine and my wife's cars to for big stuff for the last year or so, and talked to him about the transmission work as well. He said he would find a 700r4 core, rebuild it, and could figure out the conversion for about $1800.
Talking to his transmission guy in the rebuild shop wasn't confidence inspiring though, because I knew more detailed information about what is required for this conversion than he did. His response for a lot of stuff was "yeah I'll have to look that up and make sure."
I know he works on an infinite amount of transmissions and don't expect him to know everything by memory, but I was under the impression that this is a pretty common swap, especially for a guy that's supposedly been rebuilding transmissions for over a decade.
My guy will also drop in whatever transmission I give him for a few hundred bucks as well; which is worth it to me to not fight it for an entire weekend and saves me from buying tools I'll only (hopefully) use once or twice.
So, what do you think? Should I let the guy here find/rebuild/install a 700r4, or do you have experience with Monster Transmission and think I should pick up that one?
Any suggestions for how my new transmission should be built, regardless of whether I get it locally or from Monster Transmissions, would be greatly appreciated.
Cheers guys.