The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

n33k0 · 10-27-2015, 11:21 AM

I found these 2-piece flanges as an option to replace the warped ones currently on the truck
http://www.summitracing.com/parts/wlk-36133/overview/
These would allow me to cut the old ones off, and put the new ones on without having to cut or remove any sections of existing pipe.

The only catch is the price. If I need to replace all 4 flanges (worst case scenario) at $24 each, I might just be better off paying a shop to weld a better type of joint on there. Am I wrong in thinking that?

10-27-2015, 11:21 AM	#4
n33k0 Registered User Join Date: Sep 2014 Location: Florida Posts: 184	Re: Warped Exhaust Flanges I found these 2-piece flanges as an option to replace the warped ones currently on the truck http://www.summitracing.com/parts/wlk-36133/overview/ These would allow me to cut the old ones off, and put the new ones on without having to cut or remove any sections of existing pipe. The only catch is the price. If I need to replace all 4 flanges (worst case scenario) at $24 each, I might just be better off paying a shop to weld a better type of joint on there. Am I wrong in thinking that?