The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Photo of original heater control valve install?

Andy4639 · 11-09-2015, 04:05 PM

This picture is not of a Factory AC box at all. It may have been a add on at the dealership are by some one after buying it but it's not the factory AC fire wall box, that's a factory non AC heater only box.
It has either a aftermarket AC unit are a dealer under dash unit installed.

Here is a factory AC setup for a 71-72 Chevy truck.
You can see the valve even though it's not positioned in the factory spot on the fender. I wanted it further down.

11-09-2015, 04:05 PM	#14
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Photo of original heater control valve install? This picture is not of a Factory AC box at all. It may have been a add on at the dealership are by some one after buying it but it's not the factory AC fire wall box, that's a factory non AC heater only box. It has either a aftermarket AC unit are a dealer under dash unit installed. Here is a factory AC setup for a 71-72 Chevy truck. You can see the valve even though it's not positioned in the factory spot on the fender. I wanted it further down. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.