[cleszkie]

Clearing out some space in the garage, and the following items are up for sale:

- Edelbrock Performer intake manifold: EDL-2101, about 100k+ miles on it, dirty but still good to go - $30/obo SOLD

- SBC long water pump: No markings cast into pump, new not remanufactured, came on my new crate motor, only used during break-in and dyno testing - $20/obo SOLD

- Melling high volume oil pump: MEL-M55HV, used for approx 560 miles, comes with pick up (MEL-55-S1), steel intermediate shaft (MEL-IS-55E), and mounting bolt - $20/obo SOLD

- Mallory HEI distributor: Comes with MSD "Heat Module" installed (MSD-83647), about 50k+ miles on dizzy, about 560 miles on Heat module - $90/obo

- Mallory Unilite distributor: MAA-4748201H, comes with Mallory coil and Mallory inline surge protector, approx 50k+ miles on dizzy - $50/obo SOLD

- Edelbrock Cam Kit: EDL 2102, comes with lifters but they are not labeled, cam only run for 100 miles. When cam was installed one of the cam gear bolts was over-torqued and sheared off. New cam was ordered and swapped in. Sheared off bolt still in cam but could be removed with a little elbow grease - $50/obo SOLD

- TRW Performance cam: TP 174, Mild performance cam (see spec card below), 100k+ miles on it, very little wear - $15/obo SOLD

- Mickey Thompson cast aluminum valve covers: #103R-50B, clear powdercoat, no oil baffles, but they can be ordered - $50/obo SOLD

All parts are in good working order. Not trying to sell off faulty or broken junk to fellow board members. I can provide additional pictures upon request. Please keep all correspondance within this thread. No PM side bars please. All prices do not include shipping. Thanks.