11-23-2015, 01:37 PM
|
#22
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Photo of original heater control valve install?
Quote:
Originally Posted by davepl
You believe they flow water backwards too when in the open position? There's no particular reason they shouldn't, but no reason they must either. Mine doesn't flow, so I presume the vacuum is wrong, but it was also backwards.
|
When you say backwards your talking how it was mounted right? If so that shouldn't matter other than it's not mounted as it should be. that shouldn't effect the flow of the water. One of the lines need to be hooked to the water pump that would effect flow.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|