[reaper71]

Pic #1. The panel welded in.

Pic #2. The flange spot welded like factory.

Pic #3. This is the old sill (under the rear doors) This will need to be replaced before I can move forward with the quarter panel. (it was on order as well as the side uprights that's why I started on the tub first)

Pic #4. The rotted floor section removed. (if you notice the aluminum angle holding the sides together to keep from moving)

Pic #5. This was the new floor panel installed. If you look close the passenger side upright is rotted and will be replaced as well (was on order as mentioned above)

Mark...