Quote:
Originally Posted by Krex
Thank you here are the dimenisions
Total length to base 5 5/8
Center hole from top 1 1/2
Top to first little angle out 1 15/16
First angle out to 2nd angle out 1 1/4
2nd to 3rd 7/8
3rd to base about 1
All measurements are not exactly but eyed with ruler quick this morning.
|
I have the tie rod and the knuckles from both the 70 and the 76.
I also checked the small spindle pattern this weekend for fitment on the 72 caliper support and the 76 caliper support.
Also the 70 (71) big Hub and the 76 big hub on
http://www.quad4x4.com/category/GAX0...e-Parts/1.html
Appear to be the same and the 71 and 76 take the same 13 inch rotor.
The 70 and 71 and 72 are different by just drums.
So I believe my big hub should attach to the rotor and be the right size and fitment.
The only thing I may have to use is the axles shafts form the 76 since the website says it's a little longer.
What does everyone think?