Quote:
Originally Posted by Wilseya
I have the port and tube by the Distributor. The engine is so dirty I can not see the numbers, I have pressure washed it and used a bunch of degreaser with not much luck. I have replaced the dist. with an HEI unit I am waiting for plug wires and a coil. The peks of living 25 miles from town lol.
|
On your HEI, don't use the factory coil wire. Run a wire from the cap to 1 of these places. 1: the terminal on the back of the starter switch on the dash. 2: to a convenient power on when key is on power source. That way you get the full 12 volts. I think you will appreciate the HEI.
__________________
72 GMC C2500 402/Th400 first truck (still have)
77 GMC C3500 CC dually Sold
70 C50 dump truck "Rusty"
87 K10 Suburban Sold
93 K2500 xcab 6.5TD
96 GMC K2500 Suburban 6.5 TD