|
Re: 350 stock 2 barrel to 4 barrel conversion
Intake gaskets, Dist. gasket, 4BBL Carb, Carb gasket to Manifold, 4BBL linkage bracket, If your carb is Quadrajet you should all the clips cable balls. If it's Edelbrock or Holley you will need clips and balls to mount linkage. And you all ready said the Intake Manifold. Sealer bolts that go in the water passages
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|