|
Re: 75 Dually build
So I found out there was some slight interference issues with the top watts link arm. Because I have felt for quite a while the old arms were a bit to small I thought this would be a good time to replace them and build a bigger and stouter set. So I went with 1 1/4" tubing and some chromoly heim ends. I also pulled out my tubing roller and gave each arm a slight bow to clear the mount. Now all is good with the world!
With the new ride height I wanted to check the clearance with the tires to the flares and the bed sides. I got the bed sides mounted back up tonight, and then check all the clearances at full drop. Thankfully there are no issues. I still have a lot of room on all sides. Whew!
Now I need to do an overall check and take it out for a run this weekend.
Stay tuned!
|