Quote:
Originally Posted by Ironangel
Can you mock them up on the trailing arms with the axle rotated in the correct pinion angle, and then tack them? That way you not only get your width correct, you get your (very important) "pinion angle" correct as well...~Ghostrider~
|
Yes. I will be doing that to set the pinion angle and I will make sure the seats are evenly spaced from the center but I want to make sure the trailing arms will not be set too narrow of too wide on the axle so that it would create a slight bind at the bushing.
Does anyone have the overall spacing of the trailing arms on the axle?