Quote:
Originally Posted by 66clow
Thanks for chiming in to give me a starting point. You make things so easy to follow a kindergartener can do it. Hopefully I can too  . May not get back to my truck till next weekend but I'll update you. Thanks again |
Ok I did some testing. Fyi if it matters I don't have an actual horn hooked up. Didn't buy one yet if that matters. With key off I put my test lamp on the crescent wires. I show power to all wire colors except black and brown. With key on the same thing no power to black or brown. When I turn on the hazard the test light flashes on the brown, blue, and green wires. Does the horn relay effect the signals? Again signal switch is new. Ignition switch is new. New flashers, I switch them as well still no difference. All other lamps work as they should. Fuses good. Inside lamps flash with hazards.
Thanks