[70STOVEBOLT]

I posted a link to the diagram I used below. I marked the wires on the diagram with the colors from the Nu-Relics harness that I have, yours should have the same colors. If your relays come with a pigtail, the colors on the relay connector may vary. Mine had red (terminal 87), yellow (terminal 86), blue (terminal 30), white (terminal 85), and black (terminal 87a). If there is not a pigtail, just wire it like the diagram is marked on both driver and passenger side. You can tie the ground from the relay to the ground on the N-R harness for the drivers side, but you will need to ground the passenger side separately unless you want to run a wire all the way from the passenger side to the driver side to tie into the existing ground on the N-R harness. If you want I can post pics of my harness tonight after work. I have not installed my harness yet. I also cut the harness in half and shortened it about 2 feet, as it is very long. I will reconnect it once I fish the wires through the cab and doors.