The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**71CHEVYSHORTBED402** · 11-11-2016, 02:38 AM

Note: The bracket cannot be mounted to the door when installing or removing the vent window. THANKS LOCKDOC

The parts for the window channel are one bracket, one felt channel and three phillips head screws. One screw hole is located above the door latch at the rear of the door. The screw for this has an integrated washer and the thread is 1/4" x 9/16" & 20 TC. Two screw holes are located near the lower rear corner of the interior door. The screws for this have an integrated star washer and the thread is 1/4" x 1/2" & 20 TC.

So yeah, Lock was right about that as well. Mine were a different length.

11-11-2016, 02:38 AM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: Window channel bolt Note: The bracket cannot be mounted to the door when installing or removing the vent window. THANKS LOCKDOC The parts for the window channel are one bracket, one felt channel and three phillips head screws. One screw hole is located above the door latch at the rear of the door. The screw for this has an integrated washer and the thread is 1/4" x 9/16" & 20 TC. Two screw holes are located near the lower rear corner of the interior door. The screws for this have an integrated star washer and the thread is 1/4" x 1/2" & 20 TC. So yeah, Lock was right about that as well. Mine were a different length. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025