|
Re: Do I have a broken motor mount?
Quote:
Originally Posted by ab_70chevy
Yeah it doesn't raise up, just shakes the whole truck.
|
Have you got underneath the truck and inspect the three mounts? Take a pry bar with you and see if either motor mount is loose, then do the same with the trans mount. Take a look at that bell housing where it bolts to the block and check for broken or cracked areas. If it's shaking the whole truck something is broken, broken loose, or bent. Might give that drive line a close inspection as well...Chock the wheels and have a competent person get in and apply the brake and put the truck in gear while you watch the motor straddling a fender. Do not use an angry wife! Might take a look at the rear axle, trailing arms, all four springs, and the panhard bar too...
__________________
Michael of the clan Hill,
"Two Seventy Two's"
71 1-ton Dually 350 4-Speed
71 C/50 Grain Truck, 350 Split-Axle 4-Speed
02 3/4 ton Express
14 Indian Chief Vintage
1952 Ford 8N, "Only Ford Allowed On The Property" 
"Be American, Buy American" 
|