Quote:
Originally Posted by Andy4639
There is a round connection at the rear of the truck on the drivers side frame rail. Take it a part and take a test light and see if you have any power to it. Have some one push the brake pedal down and turn the lights on and check it. If so take the rear housings a part and clean the screw connections. They ground the housing to the truck. Check the connections in the housing also.
All wiring run through the turn signal wires.
|
I replaced the rear taillight wiring harness and made sure all rear grounds were grounded to bare metal. The last time I had a test light on the rear harness and didnt get power to the back. I still think its up front somewhere.