|
Re: Pulling engine
Pull them together and be through with it. I usually don't even use the leveler. It's harder it seems to wiggle that stuff back together with the dowels on the block and the engine mounts. It's all simply preference pick a way go with it. If you don't like that way lesson learned. I like to clean the tranny and put new seals front and back while it's out too. Either way have fun good luck
__________________
71 C10 Finally took a leap and did the 5.3 4l80e swap.
Running the Holley Terminator Xmax. Still working bugs out. 
|