Re: 72 GMC Grande part out
Ok, Did my homework as follows;
Oarnge71, waiting on response to clarify your request
1Rippen6, the woodgrain is weak, see pics below
Hotfun, I cant get at the carpet behind the seat to check your stuff yet, will pull the seats this weekend and get back to ya
Pickmup, It looks to be the original clutch, but I don't know how to tell. I can send pics when I get it pulled
Towbar, I'm using the pulley, heatshield is bad
DeadheadNM side markers are decent, bullseye lenses ane nice. 50.00 shipped
Gawdly The headliner and trim look good, pending removal without issue. 55.00 plus shipping, guessing in the 20.00 range
MO, you are 2nd up on the lenses
Shiny side up, cable and pedal assy. 50.00 shipped
A1, tail light lenses look nice, no chips noticed, but will inspect closer when I pull them.
Apache Ivan, I have a pending on the entire A/C, but I believe I have another vac ball on another cab, 29.00 shipped pending conformation that I have it
Clos69, GMC tailgate applique looks good, wood grain tape will need to be either removed and painted or tape replaced. 35.00, top protector 25.00 , cargo light 15.00 Plus the ride. ATOG snatched up the bezel
Undertaker, the cowl looks good, antenna is telescopic, but I have a solid mast with good cable on another truck. see pics below. 95.00 for both plus the ride
Eagle500, you are first on the a/c, pending condition on removal
Briank, the seatbelts are from a different vehicle, see pics below. I do have other belts, what color do you need
Randy500, the door panels look surprisingly nice, with the exception of a chip missing in one corner, see pics below. also, you are 2nd in line on the headliner
Chevyfan forever, you are 3rd on the headliner, rear bumper 50.00 plus shipping, gas cap 10.00 steering column will ship for 26.00. I can put the gas cap in there as well
Tbohne, cigar lighter and harness29.00 shipped
Dpassmore upper rad brackets 20.00 shipped, you are second on shroud clips and screws
I am going to put the truck on the stripper pole and make it dance this weekend. I should have everything pulled that has been requested and will have more info then.
thanks everyone for your interest, Please don't send any payments until I confirm that your requested part is removed and satisfactory.
|