The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Here's a photo of 1.875" Front/2.0" Rear Drop Springs

6T7 C10 · 08-04-2017, 09:23 PM

I think the truck and the stance looks great. I have a 67 that I replaced the tired stock springs on and went with 1/2 drop springs. The new springs were actually shorter as advertised when compared to the stock ones but once installed the new springs had a higher ride height. I went back and used a cut off wheel to take half a coil off. If your truck does not have a front sway bar on it I would highly recommend putting one on as it greatly improved the handling.

08-04-2017, 09:23 PM	#28
6T7 C10 Registered User Join Date: Feb 2015 Location: TX Hill Country Posts: 150	Re: Here's a photo of 1.875" Front/2.0" Rear Drop Springs I think the truck and the stance looks great. I have a 67 that I replaced the tired stock springs on and went with 1/2 drop springs. The new springs were actually shorter as advertised when compared to the stock ones but once installed the new springs had a higher ride height. I went back and used a cut off wheel to take half a coil off. If your truck does not have a front sway bar on it I would highly recommend putting one on as it greatly improved the handling.