The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Bob B.** · 09-10-2017, 12:22 AM

67's had power steering, but it was a hydraulic cylinder type like an older Corvette or '64- back Impala. Used a manual type box.

The '68 trucks went to the 'integral' power steering box, and those require a clearance dimple in the frame. Some late '67 trucks supposedly have the dimple, but my '67 did not. I think there are spacer kits available to mount an integral box on a '67, I believe it's the same kit used on '63-'66 trucks.

http://www.classicperform.com/power6066.htm

I would call them and make sure it fits a '67.

09-10-2017, 12:22 AM	#2
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,393	Re: 67 Power steering install 67's had power steering, but it was a hydraulic cylinder type like an older Corvette or '64- back Impala. Used a manual type box. The '68 trucks went to the 'integral' power steering box, and those require a clearance dimple in the frame. Some late '67 trucks supposedly have the dimple, but my '67 did not. I think there are spacer kits available to mount an integral box on a '67, I believe it's the same kit used on '63-'66 trucks. http://www.classicperform.com/power6066.htm I would call them and make sure it fits a '67. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.