[mjshealy]

Yes, according to the numbers in front of the bellhousing, and on the front engine pad in front of the passenger side head, it is the original 307 motor. I stumbled across the longhorn freeserver site yesterday, and found that the 31034 on the SPID denotes it as a true longhorn. The lack of custom camper anywhere leads me to believe the owner bought the truck and camper separately. Yesterday, I removed the front bed panel and cut the front bedsides back to the exact length I had on the original longhorn bed, which was 33" from the bottom of the front wheel openings to the front of the bed. I also measured the front too of the bed (stake pocket?) to the front of the side and found that it was only 1-1/4", so I marked that on the new bed, gave me the same measurement I needed on the bottom. I then took a compass and marked the 1-1/4" from the top stake pocket and marked it all the way down, and cut that amount off of the bedside. I got the driver side extension tack welded on, looks like it will work. The bed is still pushed back for working area purposes.