Quote:
Originally Posted by RustyBucket
Here's my truck with 3" springs on the rear / 2.5 spindles front not long after I bought it. ..... before the 4" springs & the 1" block. No rear bumper makes it look higher too, but you can see the difference from my earlier post pic. I didn't like the big gap between the fender lip and the tire.
|
I believe that pretty much settles it. Along with the 2&1/2 inch drop spindles I will use the 4" drop springs instead of the 3". I just want to lower it enough so that I don't have to climb up into it and I want the disk brakes also.